Incorrect Login for passwd 'nas' on first time use

smijar · **Joined:** Mon Oct 17, 2005 5:44 pm **Posts:** 4

Hi,
I just purchased and downloaded NASListe+ and burnt it onto a CD. Then, I started a machine with this CD as the bootable CD. I get the Login Screen, and as specified, I specified 'admin' as the username, and 'nas' as the password.

This did not work for some reason, and it responds by saying 'Incorrect Login'.

Please HEEELPPP!

Admin · **Posted:** Mon Oct 17, 2005 6:08 pm

http://www.serverelements.com/phpBB2/vi ... 9b8fa66a16

not sure if this will help but its worth a try..

smijar · **Joined:** Mon Oct 17, 2005 5:44 pm **Posts:** 4

Thanks for the pointer, but, the CD boots straight into the login screen-does not give me enough time to see any messages.

I don't know how to figure out what's going wrong.

smijar · **Joined:** Mon Oct 17, 2005 5:44 pm **Posts:** 4

I don't have a floppy in the machine. Its a laptop with just a built-in CD-ROM and hard drive.

smijar · **Joined:** Mon Oct 17, 2005 5:44 pm **Posts:** 4

"I had the same problem.
Seems that without a floppy installed you may not log on."

Just read this in the topic listed by edeng.

Is this true, that NASLite+ CD-ROM will not work with a machine that does not have a floppy drive installed?

Admin · **Posted:** Mon Oct 17, 2005 6:33 pm

smijar wrote:

I don't have a floppy in the machine. Its a laptop with just a built-in CD-ROM and hard drive.

There is your problem! you need a floppy to save the configuration data to..

if you laptop will boot from USB i suggest the USB verison of naslite.

NASLite Network Attached Storage

Incorrect Login for passwd 'nas' on first time use

Who is online