I have had to replace my drive 0 in my NasLite-2 system because the origial drive was failing. Had to keep running file check and repair.
I have installed the new drive installed new system, made drive bootable and with file storage, standard install option.
System boots but the file system is un-mounted and can't be formated.
DISK-0 CONFIGURATION MENU Disk Model: WDC WD30EFRX-68EUZN0, SN# WD-WCC4N3ZDTT6Y, v.82.00A82 Interface: DEVICE-SDA, HOST-0, BUS-0, TARGET-0, LUN-0 Status: NOT MOUNTED - BOOT/CONFIG DEVICE * - Export Disk-0 [ -- ] (RW, RO, --) * - Set Disk-0 Capacity Alarm [ -- ] (75, 80, 85, 90, 95, 99, --) * - Set Disk-0 S.M.A.R.T. [ -- ] (ON, --) 4 - Run Disk-0 Extended S.M.A.R.T. Self-Test * - Check Disk-0 Filesystem * - Check and Repair Disk-0 Filesystem * - Apply Journal to Disk-0 Filesystem * - Format Disk-0 * - Mirror to Disk-0 from [ NONE ] R - Return To Storage Configuration Menu
Anyone any idea what the issue is. Long shot, board looks unsupported/unused for some time.
Cheers Mel
|