Hello to the group.
Just purchased M2 and am now trying to install it for the first time. (switching from WHS)
The installation chugs along fine until the point when I get this error...
Detecting Configuration Device (unavailable) [FAIL]
Then the installer forces the pc to shut down.
My setup is listed below. The 3 samsung HDD's aren't connected to the mobo yet, but they will be after i get the os installed. The CD drive is a LITE-ON blu-ray disc combo iHES208-08 that i borrowed from another rig.
CPU = AMD Athlon II X2 240 Regor 2.8GHz
MOBO = ASUS M4N68T-M AM3 NVIDIA Geforce 7025/nForce 630a Micro ATX AMD Motherboard
OS HDD = WD 80GB (5 years old, sata/ata combo, has jumper pins, but none are set)
HDD 1 = SAMSUNG Spinpoint F3 HD103SJ 1TB
HDD 2 = SAMSUNG Spinpoint F3 HD103SJ 1TB
HDD 3 = SAMSUNG Spinpoint F3 HD253GJ 250GB
MEMORY = CORSAIR 2GB 240-Pin DDR3 SDRAM 1333 VS2GB1333D3
PSU = Antec EarthWatts Green EA-380D
CASE = Antec 300
Any ideas what the problem could be?
Thanks!
Eric