NASLite Network Attached Storage

I can't find in the network configuration to set or to verify if the Gig NIC on my NASlite-M2 pc is running at 1000mbps. I have a gig switch and router with cat 5e cable.

Connection speed is reported in your http server status pages. Go to http://192.168.x.x/Status/htm/network.htm and scroll down to the bottom of the page.
Look for the line that says "Link is up at".
Mine says:

tg3: eth0: Link is up at 100 Mbps, full duplex.

This is what I have.

Here is what mine looks like:



It's using the "intel PRO/1000 MT Desktop Adapter" a gigabit ethernet card.

I think on a lot of gigabit cards NASlite don't use the gigabit part or don't see them at all. But this intel MT one works very good.

You can all so tell by the LED's on your card or switch. At lest on my Gigabit Switch I get a Green LED for 1000 and a yellow for 100. It shows it for each Ethernet plug.

-Raymond Day