Joined: Sun Apr 02, 2006 9:05 pm Posts: 1688 Location: Up State NY in the USA!!!!
|
Not that I really understand the reason for doing this but there is no reason for it not to work. What you need to make this work reasonably well is a pair of wireless N routers of the same maker, revision number and firmware. The last part is to minimize any possible issues that could creep into the mix. A pair of flat panel antennas pointed at each other with the router right there. Do not use extension coax as the loss at the frequencies we are talking about are MASSIVE for even short distances. 18 inches maximum from connector on the router to the antenna.
Set them up in bridge mode on the bench with 2 computers first making sure you have the network setup properly. If you do it this way they should work out of the gate. I am not a wireless fan and so I can't offer you much on the fine detail of the setup. Sorry.
Mike
|
|